The Everbilt 1/2 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a vertical float switch requiring a 14 in. to 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. The pump comes with a 1-year limited warranty.. Amperage (A): 7.0 A. Cord Length (ft.): 8.25. Discharge Flow @ 0 ft. (gallons/hour): 4080. Discharge Flow @ 0 ft. (gallons/min): 68. Discharge Flow @ 10 ft. (gallons/hour): 3180. Discharge Flow @ 10 ft. (gallons/min): 53. Discharge Flow @ 15 ft. (gallons/min): 43. Features: Bottom/End Suction,Non-Clogging,Self-Priming,Solids Handling,Thermal Overload Protection. Housing Material: Aluminum. Impeller Material: Plastic. Maximum Horsepower (hp): 1/2. Maximum Pressure (PSI): 10.82. Maximum Working Temperature (F): 100. Minimum Sump Basin Diameter: 11 to 14. Minimum working temperature (F): 35. Outlet Diameter Connection (in.): 1-1/2 FPT. Pack Size: 1. Power Type Required: AC. Product Weight (lb.): 9.15 lb. Pump Switch Type: Vertical. Returnable: 90-Day. Vertical Lift (ft.): 25. Voltage: 115v. Certifications and Listings: CSA Certified. Product Depth (in.): 8.66 in. Product Height (in.): 10.63 in. Product Width (in.): 8.66 in. Switch-Off Height (in.): 1.38. Switch-On Height (in.): 4.72. Maximum Horsepower (hp): 1/2. Housing Material: Aluminum. Features: Bottom/End Suction. Features: Solids Handling. Features: Non-Clogging. Features: Self-Priming. Features: Thermal Overload Protection. Voltage: 115v