MAGNETIC CAR CELL PHONE HOLDER - CAR NAVIGATION, STEADY AS A ROCK Product Attributes Colors: Black Overall Size When Folded: 2.44 x 2.44 x 1.72 inch Stand Arm Length: 2.12 inch Magnetic Disk Diameter: 2.36 inch Weight: 5.68 oz Material: PC+ ABS + TPU + Metal Body Packaging: 1x Car Phone Holder 1x Metal Ring 1x Dry Cloth 1x Wet Wipes 1x Instructions for Use Installation Method: 1. Peel off the protective film from the adhesive base on the bottom of the product and stick it on a clean and dust-free dashboard for a firm fit. Tip: After pasting, please wait for 24 hours to keep sure the strong adhesion 2. Turn the knob clockwise to release excess air and secure the suction cup 3. Adjust the support linkage to the best position for easy access 4. Compatible with MagSafe phones and cases, just connect them to the support with a straight drop For phones or cases that are not compatible with MagSafe, please install the metal ring first, please note: 1. Before attaching the metal ring, take care to clean the phone or case you need to attach 2. Place the metal ring where you want to attach it, press firmly, and then wait for 24 hours before using it 3. Please be careful to avoid placing the metal ring inside the case, resulting in the magnetic attraction may be weakened Note: It is recommended that you read the instructions inside the package before using this product to keep sure of safe and proper use Product Feature & Functions 1. Strong magnetic core design, the phone is attached immediately, bumpy road does not loosen, emergency braking does not fall off 2. Metal material is resistant to bending and bending, more resistant to manufacturing than ordinary plastic bracket, holding the phone steadily in the car without shaking or breaking 3. Suction cup mounting, a press of the adsorption, the knob reinforced and not moving, windshield, dashboard can be fixed firmly