The Everbilt 3/4 HP submersible sump pump is constructed of heavy-duty cast iron and features a PSC motor for energy efficiency and savings. The fasteners for the HDS75 are corrosion resistant stainless steel and the pump is protected by a powder coated epoxy finish. The Everbilt HDS75 is engineered to pass a 1/2 in. solids and features a vortex non-clogging impeller making it an ideal pump for sump, effluent and dewatering applications, such as basement sumps, mound systems and septic tanks.. Amperage (A): 9.0 A. Cord Length (ft.): 10 ft. Discharge Flow @ 0 ft. (gallons/hour): 6000. Discharge Flow @ 0 ft. (gallons/min): 100. Discharge Flow @ 10 ft. (gallons/hour): 4800. Discharge Flow @ 10 ft. (gallons/min): 80. Discharge Flow @ 15 ft. (gallons/min): 60. Features: Bottom/End Suction,Corrosion Resistant,Non-Clogging,Self-Priming,Solids Handling,Submersible,Thermal Overload Protection. Housing Material: Cast-Iron. Impeller Material: Cast Iron. Maximum Horsepower (hp): 3/4. Maximum Pressure (PSI): 12.12 PSI. Maximum Working Temperature (F): 104. Minimum Sump Basin Diameter: 14 1/2 to 17 7/8. Minimum working temperature (F): 32. Outlet Diameter Connection (in.): 1-1/2 FPT. Pack Size: 1. Power Type Required: AC. Product Weight (lb.): 33 lb. Pump Switch Type: Vertical. Returnable: 90-Day. Vertical Lift (ft.): 28. Voltage: 115v. Certifications and Listings: CSA Certified. Product Depth (in.): 10.62 in. Product Height (in.): 10.6 in. Product Width (in.): 8.55 in. Switch-Off Height (in.): 3.2. Switch-On Height (in.): 7.5. Housing Material: Cast-Iron. Impeller Material: Cast Iron. Voltage: 115v