Patching nail holes, cracks, and gouges on white-painted trim, baseboards, and molding is frustrating when a natural-toned filler bleeds through the topcoat and demands extra primer. Gorilla Wood Filler White is a water resistant formula that does not shrink or crack, making it ideal for indoor or outdoor projects and repairs on painted wood surfaces. The unique formula is easy to spread, allowing for a smooth finish with high performance stainability, paintability, and sandability — so every repair under white or light-colored paint is clean, seamless, and built to last. USE IT FOR: Use it for: white painted trim and baseboards, window casings, door frames, painted furniture, molding and millwork, nail and screw hole filling, light-colored wood repairs, outdoor trim (with exterior paint topcoat) DIRECTIONS: 1.) PREPARE — Clean and dry the surface of all dirt, dust, and foreign material. Surface, filler, and air temperature should be above 40 degrees F. Knead before use. 2.) FILL — Squeeze tube and apply filler to the damaged area using a putty knife. Press firmly in place and remove excess. Large or deep holes may require a second application. 3.) SAND — Allow to dry approximately 1 hour for shallow fills and 2 to 6 hours for deeper holes. Sand smooth using medium sandpaper or a high speed sander. 4.) FINISH — Paint with latex or oil-based paint as desired. Test stain on scrap wood with filler before applying to the full surface. For outdoor use, coat with exterior paint. 5.) CLEAN UP — Remove all excess residue with a damp cloth before filler dries. Wash hands and tools with soap and water before material sets. Reseal cap tightly after each use.