Our Screen Is High Quality LCD Display Touch Screen Digitizer Assembly Replacement For iPhone 14 Pro Max Product Description: -Material: TFT -Model: A2894, A2651, A2893, A2895 -Size: 6.7 inches -Package Including: 1x LCD Touch Screen Assembly Replacement 1x A Set Of Install Kits Installation Precautions: 1.Power off & discharge: Turn off the phone; drain battery to below 25% to reduce risks. 2.Remove bottom screws: Take out the two 6.8mm pentagonal screws with a screwdriver. 3.Heat screen edges: Heat each edge for ~90s (hair dryer/heat gun) to soften the glue. 4.Separate screen: Use a suction cup to create a gap; insert a triangular pry tool (?3mm depth) to separate glue (avoid left edge with cables); twist two tools to release left clips, then flip the screen up from the right. 5.Disconnect battery: Remove 8 screws of the battery connector cover, take off the cover, and pry up the battery cable. 6.Remove old assembly: Take off its connected cables and screws, then remove the old assembly. 7.Install new assembly: Position it correctly, connect all cables, and tighten screws. 8.Reconnect battery: Align and insert the battery cable, reattach the cover, and tighten screws. 9.Test new assembly: Power on to test touch, display, Face ID, etc., before full fixation. 10.Secure screen: Apply proper glue to edges, press the screen onto the frame, and wait for glue curing.